Why SAMSUNG Choose The Intelligent ABS Fixture LED Sign?

/5 Comments/in /by

SAMSUNG is one of the world’s most well-known communication brands, their market covers all over the world. Generally, SAMSUNG stores/retail shops etc. terminals sellers will be equipped with specific SAMSUNG led shop signs.

And from 2020 and 2021, all SAMSUNG shops changed their new ABS injection moulding led fixture signage, they changed the sharp angels on their logos and some other small details to increase their brand image. And very good news, FOG Lighting has updated all the new moulds for SAMSUNG signs, welcome to send us an email via [email protected] to get the available sizes.

Why did SAMSUNG choose the ABS LED sign instead of other crafts?

In the past, the indoor sign solution is usually resin signage, however, there will have many limits due to the high prices and long production time. So we recommended the injection moulding led fixture signage to the SAMSUNG head office to solve these limitations and help to make the chain-brand shop signs standard, unified in the worldwide market.

And now, all the SAMSUNG led light signs, no matter the shopfront led sign, indoor desktop sign, and other led light letters in the SAMSUNG shops, all using the ABS led letters. Including their sub-brands, and the mobile phone models, like Galaxy, QLED series, S8, S9, etc (just write out parts of them).

The ABS injection molding led signage is using injection moulding machines to produce the letter shells, so we need to open stainless steel moulds at the start that are needed put into the injection moulding machines when starting production. Later after the ABS shell/housing is finished, put the customized led PCBA board in the shell and fix it. Many factories are using glass glue to fix, however, FOG Lighting continues to insist fix by screws, although it will increase our production cost. Last insert the PC face panel into the ABS letter shell and fix it with organic glue. Need special pay attention to the PC face panels, as the ABS letter shells are made by the moulds, the face panel we also need to use the high-precision engraving machines to engrave then can be fit rightly.

Note: FOG Lighting has many ready-molds for the chain brands, including mobile brands, telecom brands, car brands, as well as local famous brands in different markets, welcome to send us messages to check by email [email protected].

The featured advantages for ABS led letter sign

1. High-precision open-mould production, high precision, good lighting effect, no light leakage.
2. Customized Aluminum PCBA board, high light, even lighting, no dead corner/blind spots, and shadows when lighting.
3. Using high-brightness LEDs, no dark spots
4.1MM ultra-narrow edge, light-emitting area up to 98%
5. Ultra-thin and lightweight, beautiful outlook and support various installation methods, pin-mounted series, Hanging series, desktop series, floor standing series, as well as the series.
6. Very suitable for mass production, with a short production cycle.
7.2020/2021 Newest SAMSUNG ABS fixture sign ready-moulds, available sizes: H75mm, H100mm, H125mm, H150mm, H175mm H200mm, H250mm.

 

If need to place an order for SAMSUNG LED light signs, or inquiry for more information, welcome to contact us via [email protected].

Anti-UV Outdoor OPPO Shop Sign

ABS Moulded LED Sign, Two Different Crafts for OPPO Chain Shops

/2 Comments/in /by

The sales of OPPO mobile phones have been increasing greatly in recent years. OPPO stores are blooming both in the domestic market and global market. Such explosive sales growth is directly linked to the viral development of OPPO offline stores. In China, when we go out, we can see OPPO stores with white luminous logos on the green bottom plate everywhere.

The demand for LED luminous signage is huge because of such a big quantity of offline stores, all the OPPO stores need at least 1 set of the OPPO shopfront LED signs. Here let FOG Lighting introduce the OPPO PCBA circuit board light source injection moulding led sign craft in detail for you, mainly used for indoor and outdoor advertising, as well as the counter display LED signage. FOG Lighting has specially developed a full series of OPPO LED shop signs, to serve and meet the requirements of the OPPO brand’s advertising.

To meet the big chain brands requirements of LED signage, high quality, even lighting, standard, and uniform, FOG Lighting developed a new injection moulding craft to make the LED signage, using LED PCBA board as light source, injection moulding machines to make the sign outer shells, which can achieve big volume production in very short lead time. In this article, let me introduce this craft and the OPPO case in detail to everyone.

OPPO Front-lit LED shop sign — ABS injection moulding craft

The most commonly used type is the ABS front-lit LED sign for the shopfront, OPPO stores are the same. The OPPO sign shell is using imported ABS materials to build, chemical stability, not easy to deform. Moreover, the production is extremely high for the ABS injection moulded shell, the outlet hole, heat dissipation holes, and mounting holes are integrally formed, which is highly efficient.

The LED PCBA light source is using the aluminium substrate, the OPPO signs we are using the 2835 LEDs, which have a large luminous angle, to full use the diffuse reflection principle. No need to install very dense LEDs to achieve a high brightness, uniform lighting effect, energy-saving and high efficiency.

The PCBA light source is fully matched with the ABS shell, the LEDs are well distributed on the aluminum base by the LED placement machine/Mounter. Moreover, the heat dissipation performance of the aluminum substrate is more than three times of iron material.

The OPPO led signs we are using PC materials as the face panel, with strong toughness, and the PC face panel can be seamlessly connected with the ABS shell, the light transmittance exceeds 90%, all lead to good performance on the lighting.

OPPO front-lit ABS signage FOG Lighting has full sizes from H66mm to H800mm, indoor and outdoor, as well as counter display LED signage, I will share some photos at the bottom of this article.

OPPO Backlit LED shop sign — ABS moulded craft

OPPO backlit ABS LED signs are applied to the background wall of OPPO stores, the logo shell and the bottom transparent box are integrated injection moulding. Here we can see both the green front shell and the bottom white base shell of the sign are made by the precise stainless steel mould, the light source we are using are the LED PACBA aluminium baseboard, using pin mounted installation system.

The advantages of this superior ABS injection moulding craft

1. PC face panel

PC material has good light guiding, can well transform the LED light source, and presents a high-brightness, uniform lighting effect.

The PC panel has very good toughness, is not easy to break, convenient to match the ABS shells. Moreover, the good toughness specification makes the PC panel and the ABS shell more tightly and firmly nested, and achieve a seamless connection.

2. ABS injection moulding sign shell

FOG Lighting’s ABS shells are injection moulded by the stainless steel moulds, including heat dissipation holes, wire outlet holes, installation holes and other configurations. One-piece injection moulding craft, the ABS shells has the features of the sizes stable, lightweight, strong weather resistance.

3. Advantages of the LED PCBA circuit board light source

* Even lighting effect, more flexible on distributing the LEDs, which solves the problem of brightness inconsistency of strokes’ size and thickness.

* Stable quality, using large chips and aluminum substrates, high brightness with low light decay.

* Production efficiency, the production efficiency of installing the PCBA is more than 10 times higher than LED modular and the LED strips, saving the labour costs.

* Cost-effective, compared with the LED PCBA boards brightness, quality, and production costs, the LED PCBA board is considered to be more cost-effective overall.

Welcome to send us messages via [email protected] to get more info, or get quotations for your projects.

Moreover, if need to order OPPO signs for your projects, also welcomed.

 

2019-Guangzhou-DPES-Show

FOG Lighting Attend DPES Sign & LED Expo China

/33 Comments/in /by

FOG Lighting Attend DPES Sign & LED Expo China on 2019 and 2020

 

FOG Lighting had attended the 2019 DPES SIGN EXPO CHINA advertising exhibition, which was held in Guangzhou Pazhou Poly World Trade Expo. The products display on the DPES show are mainly brands of LED logo solutions, including pin mounted luminous LED signage, desktop luminous LED signage and LED lightboxes. The chain brands signage solutions bring together various specifications of the ABS injection moulding LED logo solutions for the mobile phone brands, home appliance brands and well-known overseas brands. We will introduce them in detail below.

2019-Guangzhou-DPES-Show

1. ABS injection moulding LED signage solutions for SAMSUNG Group

Samsung brand luminous LED signage products are one of the main products promoted by FOG Lighting at this exhibition. FOG Lighting opened moulds for SAMSUNG logos according to Samsung’s global guidance documents, and produce ABS injection-molded LED luminous logos for SAMSUNG brands, including Galaxy, Android TV, QLED series etc.
ABS mold led signage to unify all the store logo standards, and improve its brand image.

2. OPPO, VIVO, HUAWEI, HONOR, etc. Chinese big mobile phone brands LED signage solutions

FOG Lighting occupies a large part of the Chinese and global market in OPPO, VIVO, HUAWEI, HONOR, etc. domestic mobile phone giant brands. FOG Lighting has rich production experience and overcomes a variety of production problems. You can see here in our booth has more than 50 brands logos. And these are only small parts of our cooperated clients.
The mobile phone brands logos in this exhibition include LED luminous back-mounted signs, led desktop display luminous signs, and Huawei desktop magnetic LED light sign.

3. Home appliance brand identity solution

Such as Midea, Haier, Siemens, leader, sharp and other stores with luminous signs

4. China Mobile LED logo solution, one of the three China Communications companies

The stores of China Mobile, China Unicom, China Telecom can be said to be everywhere. FOG lighting is served for China Mobile, customized led logos to their communication stores.

5. ABS injection moulding lightbox

Different from the traditional lightbox, the whole lightbox shell is integrally formed by the injection moulding machine, with a high-grade and atmospheric outlook, uniform luminescence without any shadow, which is suitable for mass customization of chain brands.

 

The injection molding signage solution can realize mass production, and even finish a mass production in a very short time, like finishing a thousand sets of SAMSUNG ABS fixture signs in a week.
High precision, fast production efficiency, time-saving, cost-saving, non wrapped design, integrated moulding of injection molding bottom box, fashionable appearance and luminous effect are no less than boundless LED signage.
For friends who need mass production for brand logos, injection molding ABS signage is undoubtedly a good choice.

For more information or need custom your own logos, pls feel free to contact us at [email protected], we are happy to hear from you.